The SAHARA heavy-duty aluminium lighting pole is designed for roadway projects where pole height, mounting arrangement and long-term outdoor exposure need to be considered together. Its tapered profile gives the structure a straightforward appearance suited to highways, main roads and other transport infrastructure.
Made from 6063-T6 aluminium alloy, SAHARA is available in a listed height range of 6 to 12 metres. Flange-mounted and direct-burial configurations provide options for different foundation and installation requirements.
SAHARA Conical Roadway Pole
SAHARA uses a conical pole profile that narrows towards the top. This familiar form is used in roadway lighting because the pole dimensions can be designed around the mounting height, luminaire arrangement and structural loads required for a particular project.
The pole is intended for more than one type of road layout. Depending on the approved configuration, it can accommodate single-arm, dual-arm or other specified lighting arrangements. The final design should be checked against the luminaire weight, outreach geometry and local wind requirements.
Tapered Aluminium Structure
A conical profile provides a practical form for roadway lighting installations. Pole dimensions should be selected according to the project load calculations.
6063-T6 Aluminium Alloy
Aluminium construction offers corrosion resistance and a lower component weight than many conventional steel poles.
Two Mounting Options
Flange mounting and direct burial are listed options. The appropriate method depends on the foundation design and installation conditions.
Choice of Surface Finish
Satin brushed, anodized and powder-coated finishes are listed for projects with different appearance and surface-treatment requirements.
Technical Specifications
Use the following listed specifications as a starting point for product evaluation. Confirm the final dimensions and configuration against the current technical drawing before ordering.
| Model | SAHARA |
|---|---|
| Product Type | Conical Aluminium Roadway Pole |
| Material | Aluminium 6063-T6 |
| Bottom Diameter | Ø152–203 mm |
| Top Diameter | Ø89–140 mm |
| Wall Thickness | 3.2–4.0 mm |
| Height Range | 6–12 m |
| Mounting Options | Flange Mount / Rooted (Direct Burial) |
| Access Door | 100 × 400 mm |
| Surface Finish | Satin Brushed, Anodizing, Powder Coating |
| Corrosion Resistance | Listed for harsh and coastal environments; confirm project exposure requirements |
Engineering note: Diameter, wall thickness and height ranges are product options, not necessarily one combined standard configuration. Structural capacity depends on the complete pole design, mounted equipment, wind conditions and foundation. Request the project-specific drawing and load assessment before approval.
Applications on Highways and Main Roads
SAHARA can be considered for roadway lighting projects where a tapered aluminium pole fits the design and installation requirements. Typical project types include:
- Highways and expressways
- Main urban roads and arterial routes
- Road intersections and large traffic areas
- Industrial estates and logistics facilities
- Municipal roadway lighting projects
Pole height and spacing should be selected as part of the lighting design. Road width, luminaire optics, required illumination and uniformity all affect the final layout.
What to Check Before Selecting a Roadway Pole
For a highway or main-road installation, the pole should be specified as part of the complete lighting assembly. The following details are worth confirming early in the project:
- Mounting height and arm arrangement: Confirm the required pole height, outreach and number of luminaires.
- Structural loading: Check luminaire weight, projected area, wind speed and any additional equipment mounted on the pole.
- Foundation interface: Match the flange, anchor bolts or embedded section to the approved foundation drawing.
- Surface treatment: Choose the finish based on appearance, exposure and project maintenance requirements.
- Service access: Confirm access-door position, cable routing and maintenance requirements before fabrication.
Discuss Your Roadway Lighting Requirements
If you are specifying aluminium lighting poles for a highway, arterial road or infrastructure project, share the required height, luminaire details, mounting arrangement and site conditions with Morelux. These inputs help establish the right configuration before technical approval and quotation.
The final selection should be based on the project drawings and verified structural requirements, rather than pole dimensions alone.
Request Information About SAHARA
Contact Morelux to discuss the SAHARA conical aluminium roadway pole, mounting options, surface finishes and project-specific technical documentation.




